path: root/Emacs/.config/emacs/config.org

#+title: Emacs configuration
#+author: Oreodave
#+description: My new Emacs configuration
#+property: header-args:emacs-lisp :tangle config.el :comments link
#+options: toc:nil

#+begin_center
My configuration for vanilla Emacs
#+end_center
#+latex: \clearpage
#+toc: headlines
#+latex: \clearpage

* Initial
Let's setup some basics.

Firstly, set full name and mail address for use in a variety of
applications, including encryption.
#+begin_src emacs-lisp
(setq user-full-name "Aryadev Chavali"
      user-mail-address "aryadev@aryadevchavali.com")
#+end_src

Let's set all yes or no questions to single letter responses.
#+begin_src emacs-lisp
(fset 'yes-or-no-p 'y-or-n-p)
#+end_src
** No littering
Setup no-littering, which cleans up many of the default directories in
Emacs.
#+begin_src emacs-lisp
(straight-use-package 'no-littering)

(setq no-littering-etc-directory (expand-file-name ".config/"  user-emacs-directory)
      no-littering-var-directory (expand-file-name ".local/" user-emacs-directory))

(require 'no-littering)
#+end_src
** File saves and custom file
Now let's setup file saving and auto-revert-mode.  Along with that,
setup the custom-file to exist in the var-directory
#+begin_src emacs-lisp
(use-package emacs
  :straight nil
  :init
  (setq backup-directory-alist `(("." . ,(no-littering-expand-var-file-name "saves/")))
        global-auto-revert-non-file-buffers nil
        auto-revert-verbose nil)
  (setq custom-file (no-littering-expand-etc-file-name "custom.el"))
  :config
  (global-auto-revert-mode 1))
#+end_src
** Hide-show mode
Turn on hs minor mode for all prog-mode.
#+begin_src emacs-lisp
(use-package hideshow
  :straight nil
  :hook (prog-mode-hook . hs-minor-mode))
#+end_src
** Aesthetics
Load my custom "personal-theme" theme (look at [[file:personal-theme.el][this file]]).
#+begin_src emacs-lisp
(use-package custom
  :demand t
  :straight nil
  :config
  (load-theme 'monokai t))
#+end_src

Set font size to 125 if no monitor is plugged in.
#+begin_src emacs-lisp
(use-package faces
  :straight nil
  :config
  (set-face-attribute 'default nil :height 115))
#+end_src

Turn off the startup buffer because I don't particularly care for it,
and write into the scratch buffer some nice information about Emacs.
#+begin_src emacs-lisp
(use-package startup
  :straight nil
  :defer t
  :init
  (setq inhibit-startup-screen t
  initial-scratch-message (format ";; Emacs v%s\n" emacs-version)
  ring-bell-function 'ignore)
  (add-hook 'emacs-startup-hook
      #'(lambda () (with-current-buffer "*scratch*"
    (insert (format ";; Loaded in %s\n" (emacs-init-time)))))))
#+end_src
* Emacs Mode-line
Firstly, declare a variable for the separator between each module
#+begin_src emacs-lisp
(defconst +modeline/separator " " "Separator between modules.")
#+end_src

Then declare a variable for the number of separators between each
module in the modeline.
#+begin_src emacs-lisp
(defconst +modeline/sep-count 4 "Number of +modline/separator instances separating modules.")
#+end_src

Then, declare a list of reserved characters for which the previously
declared seperator won't be applied when placed at the end of a module
string.
#+begin_src emacs-lisp
(defconst +modeline/reserved-chars (list "[" "(")
        "Characters that, when at the end of a module string, won't have the separator applied to them.")
#+end_src

Now declare a function that applies the separator with respect to the
reserved characters to any one string.
#+begin_src emacs-lisp
(defun +modeline/handle-string (STR)
  (condition-case nil
      (progn
        (string-blank-p STR)
        (cond ((cl-member (car (last (split-string STR "" t))) +modeline/reserved-chars :test #'string=) STR)
              (t (concat STR (cl-reduce #'concat (cl-loop for i from 1 to +modeline/sep-count collect +modeline/separator))))))
    (error STR)))
#+end_src

Finally, set the mode-line-format.
#+begin_src emacs-lisp
(setq-default
 mode-line-format
 (mapcar #'+modeline/handle-string
       (list "%l:%c"
             "%p["
             '(:eval (upcase
                      (substring
                       (format "%s" (if (bound-and-true-p evil-state) evil-state ""))
                       0 1)))
             "]"
             "%+%b("
             '(:eval (format "%s" major-mode))
             ")"
             "%I"
             vc-mode
             mode-line-end-spaces)))
#+end_src
* Custom Functions
These are custom functions I have defined
** New line function
Vim bindings don't have a nice way of adding new lines before or after
the current line while staying in normal mode.  You can use =o/O= to
enter insert mode at a new line, but this isn't the same as being able
to stay in normal mode while opening newlines and only adds extra
keypresses if your only purpose was to open up some lines.

As this is Emacs I can extend it as I wish, so I decided to define a
new line function that won't remove me from normal state.

The logic is pretty simple:
- Record current location as =old=
- Use the predefined vim functions for opening new lines above and
  below with insert mode
- Return to =old=
- Enter normal state

#+begin_src emacs-lisp
(with-eval-after-load "evil"
  (defun dx:newline (&optional BACKWARD)
    (interactive)
    (save-excursion
      (cond ((and BACKWARD (= BACKWARD 1)) (evil-open-below 1))
            (t (evil-open-above 1))))
    (evil-normal-state)))
#+end_src
** Toggle buffer
*** Toggle buffer preamble
There are many cases where 'toggling' a buffer is very useful.  For
example, toggling a shell to access it quickly and hide it away with
little annoyance.

This is negligible with a bit of Emacs lisp.  However, as stated
earlier, there are /many/ cases where this is useful.  Following the
DRY principle means a more abstract function would be better to use
here.

One may use higher order functions to create an abstract form that
handles toggling, and then the caller can wrap this call in a new
function if they wish to use it in a keybinding.  This format or
construct is kinda common (using a higher order function and wrapping
it in an interactive function for use in a binding), so I created a
macro that further wraps this functionality, creating a custom
function for you.

The macro asks for a function name, a buffer name and the function
necessary to create that function.  It then generates a function with
the given name that holds the necessary logic to 'toggle' buffers.
*** Code
#+begin_src emacs-lisp
(defmacro +dx/create-toggle-function (func-name buf-name buf-create)
  "Generate a function named func-name that toggles
the buffer with name buf-name and creation function buf-create."
  `(defun ,func-name ()
     (interactive)
     (let* ((buffer (or (get-buffer ,buf-name) (,buf-create)))
            (displayed (get-buffer-window buffer)))
       (cond (displayed
              (select-window displayed)
              (delete-window))
             (t
              (display-buffer buffer)
              (select-window (get-buffer-window buffer)))))))
#+end_src
** Power function
Basic, tail recursive algorithm for calculating powers
#+begin_src emacs-lisp
(defun pow (a n &optional initial)
  "Raise a to the nth power.  Use init to set the initial value."
  (let ((init (if initial
                  initial
                1)))
    (if (= n 0)
        init
      (pow a (- n 1) (* a init)))))
#+end_src
** Define procedure
=lambda= provides a function with possible arguments.  A procedure is
something I define as essentially a function without arguments.  This
macro returns an anonymous function with no arguments with all the
forms provided.  It returns it in 'backquoted' form as that is the most
common use of this macro.
#+begin_src emacs-lisp
(defmacro proc (&rest CDR)
  "For a given list of forms CDR, return a quoted non-argument lambda."
  `(quote (lambda () ,@CDR)))
#+end_src
* Core packages
** General
Setup general, a good package for defining keys.  In this case, I
generate a new definer for the "LEADER" keys.  Leader is bound to SPC
and it's functionally equivalent the doom/spacemacs leader.
#+begin_src emacs-lisp
(use-package general
  :demand t
  :config
  (general-def
    :states 'normal
    "SPC"   nil
    "M-V"   #'dx:newline
    "M-v"   (proc (interactive) (dx:newline 1)))

  (general-create-definer leader
    :states 'normal
    :keymaps 'override
    :prefix "SPC")

  (leader
    :infix "b"
    "d" #'kill-this-buffer))
#+end_src
*** Some default binds in Emacs
With a ton of use-package declarations (to defer until the last
moment), bind to general some basic binds.
#+begin_src emacs-lisp
(use-package face-remap
  :straight nil
  :general
  (general-def
    :states 'normal
    "C--" #'text-scale-decrease
    "C-=" #'text-scale-increase))

(use-package frame
  :straight nil
  :general
  (general-def
    "C-x d" #'delete-frame))

(use-package simple
  :straight nil
  :general
  (leader
    "SPC" #'execute-extended-command
    "u"   #'universal-argument
    ";"   #'eval-expression))

(use-package files
  :straight nil
  :general
  (leader
    "q"  #'save-buffers-kill-terminal
    "cF" (proc (interactive) (find-file "~/Code/")))
  (leader
    :infix "f"
    "f" #'find-file
    "s" #'save-buffer
    "p" (proc (interactive) (find-file (concat user-emacs-directory "config.org")))))

(use-package compile
  :straight nil
  :general
  (leader
    "cc" #'compile))

(use-package imenu
  :straight nil
  :general
  (leader
    "si" #'imenu))

(use-package help
  :straight nil
  :general
  (leader
    "h"   #'help-command))

(use-package async
  :straight nil
  :general
  (leader
    "!" #'async-shell-command))
#+end_src
** Evil
*** Evil Preamble
Evil (Emacs VI Layer) is a package that provides the Vi experience to
Emacs.  Packaged with it alone are:
- Modal system
- EX
- Vi mapping functions

This provides a lot of stuff for the vim user moving to
Emacs.  However there are many other packages surrounding evil that
provide even greater functionality from vi to Emacs.  Surround,
commenting, multiple cursors and further support to other packages are
configured here.
*** Evil Core
Setup the evil package, with some basic keybinds.
#+begin_src emacs-lisp
(use-package evil
  :hook (after-init-hook . evil-mode)
  :general
  (general-def
    :states 'normal
    "TAB"                      #'evil-jump-item
    "r"                        #'evil-replace-state)
  (general-def
    :states 'visual
    :keymaps 'emacs-lisp-mode-map
    "gr" #'eval-region)
  (leader
    "w"  #'evil-window-map
    "wd" #'delete-frame)
  :init
  (setq evil-want-keybinding nil
        evil-split-window-below t
        evil-vsplit-window-right t
        evil-want-abbrev-expand-on-insert-exit t)
  :config
  (fset #'evil-window-vsplit #'make-frame)
  (evil-mode))
#+end_src
*** Evil surround
#+begin_src emacs-lisp
(use-package evil-surround
  :after evil
  :config
  (global-evil-surround-mode))
#+end_src
*** Evil commentary
#+begin_src emacs-lisp
(use-package evil-commentary
  :after evil
  :config
  (evil-commentary-mode))
#+end_src
*** Evil mc
Setup for multicursors in Evil mode.  Don't let evil-mc setup it's own
keymap because it uses 'gr' as its prefix, which I don't like.

Instead, bind some useful functions to my personal =dx:evil-mc-map=
which is bound to 'gz'.  Furthermore, define a function
=dx:evil-mc-cursor-here= which pauses cursors upon placing a cursor at
the current position.
#+begin_src emacs-lisp
(use-package evil-mc
  :after evil
  :bind (("M-p" . evil-mc-skip-and-goto-prev-cursor)
         :map dx:evil-mc-map
         ("q"   . evil-mc-undo-all-cursors)
         ("d"   . evil-mc-make-and-goto-next-match)
         ("j"   . evil-mc-make-cursor-move-next-line)
         ("k"   . evil-mc-make-cursor-move-prev-line)
         ("j"   . evil-mc-make-cursor-move-next-line)
         ("m"   . evil-mc-make-all-cursors)
         ("z"   . dx:evil-mc-cursor-here)
         ("r"   . evil-mc-resume-cursors)
         ("s"   . evil-mc-pause-cursors))
  :init
  (setq evil-mc-key-map nil)
  (define-prefix-command 'dx:evil-mc-map)
  (bind-key "gz" dx:evil-mc-map evil-normal-state-map)
  :config
  (global-evil-mc-mode +1)
  (defun dx:evil-mc-cursor-here ()
    (interactive)
    (evil-mc-make-cursor-here)
    (evil-mc-pause-cursors)))
#+end_src

*** Evil lion
Evil lion provides alignment operators.  Alignment operators allow you
to, on some given text, align it via a symbol.

For example it can transform the following
#+begin_example
(James . 19)
(Arthur . 22)
#+end_example

to
#+begin_example
(James  . 19)
(Arthur . 22)
#+end_example

which would be done via =gl<object><symbol>= (in this case =glip.=)

#+begin_src emacs-lisp
(use-package evil-lion
  :after evil
  :config
  (evil-lion-mode))
#+end_src
*** Evil collection
Setup evil collection, but don't turn on the mode.  Instead, I'll turn
on setups for specific modes I think benefit from it.
#+begin_src emacs-lisp
(use-package evil-collection
  :after evil
  :config
  (evil-collection-require 'dired))
#+end_src

** Completion
*** Completion Preamble
Emacs is a text based interface.  As a text based interface it heavily
leverages searches and user filters to manage input and provide
functionality.  Though the standard model of completion may be
desirable to some, it can be advanced through the use of 'completion
frameworks'.

These frameworks handle the input from the user for common commands
and provide a differing interface to the one Emacs comes with.  Most of
these completion frameworks provide a text based menu that is actively
filtered as more input is provided.  Along with these frameworks come
added functionality and applications to integrate into the Emacs
environment further.

One may say that when using a completion framework there is no point
in using any other framework as they encompasses so much of the
default functionality.  However I'd argue that with a bit of management
and Emacs lisp it's totally possible to pick and mix your options.  For
small number selections (like finding files) use something like Ido
and for something larger like searching buffers use ivy.

Along with frameworks, there is a configuration for the
completions-list, which is actually the original and default method of
completion within Emacs.  When you first install Emacs without a
config, any 'completing-read' function leverages the completions-list when
=TAB= is used.

Though I believe Ido is a better completion system than the
completions-list, it still has it's place and can be used in tandem
with ido.
*** Ido
Ido is a very old completion package that still works great to this
day.  Though it is limited in its scope (and may thus be called a
completion add-on rather than a full on framework), it is still a very
powerful package.  With the use of ido-completing-read+, it may be used
to as a fully fledged completion framework.

#+begin_src emacs-lisp
(use-package ido
  :demand t
  :general
  (general-def
    :keymaps '(ido-buffer-completion-map
               ido-file-completion-map
               ido-file-dir-completion-map
               ido-common-completion-map)
    (kbd "M-j")   #'ido-next-match
    (kbd "M-k")   #'ido-prev-match
    (kbd "C-x o") #'evil-window-up)
  :init
  (setq ido-decorations
        (list "{" "}" " \n" " ..." "[" "]" " [No match]" " [Matched]"
              " [Not readable]" " [Too big]" " [Confirm]")
        completion-styles '(flex partial-completion intials emacs22))
  (setq-default ido-enable-flex-matching t
                ido-enable-dot-prefix t
		            ido-enable-regexp nil)
  :config
  (ido-mode)
  (ido-everywhere))
#+end_src
**** Ido-completing-read+
Ido completing-read+ is a package that extends the ido package to work
with more text based functions.
#+begin_src emacs-lisp
(use-package ido-completing-read+
  :after ido
  :config
  (ido-ubiquitous-mode +1))
#+end_src
**** Amx
Amx is a fork of Smex that works to enhance the
execute-extended-command interface.  It also provides support for ido
or ivy (though I'm likely to use ido here) and allows you to switch
between them.

It provides a lot of niceties such as presenting the keybind when
looking for a command.

#+begin_src emacs-lisp
(use-package amx
  :after ido
  :config
  (amx-mode))
#+end_src
*** Completions-list
#+begin_src emacs-lisp
(use-package simple
  :straight nil
  :general
  (general-def
    :keymaps 'completion-list-mode-map
    :states 'normal
    "l"   #'next-completion
    "h"   #'previous-completion
    "ESC" #'delete-completion-window
    "q"   #'quit-window
    "RET" #'choose-completion)
  :config
  (with-eval-after-load "evil"
    (setq evil-emacs-state-modes (cl-remove-if
                                  #'(lambda (x) (eq 'completions-list-mode x))
                                  evil-emacs-state-modes))
    (add-to-list 'evil-normal-state-modes 'completions-list-mode)))
#+end_src
*** Ivy
Ivy is a completion framework for Emacs, and my preferred (sometimes
second favourite) one.  It has a great set of features with little to
no pain with setting up.
**** Counsel
Setup for counsel.  Load after ivy and helpful.

Along with that, set the help function and variable functions to their
helpful counterparts.
#+begin_src emacs-lisp
(use-package counsel
  :general
  (leader
    "ss" #'counsel-grep-or-swiper
    "sr" #'counsel-rg)
  :init
  (general-def
    [remap describe-bindings]        #'counsel-descbinds
    [remap load-theme]               #'counsel-load-theme)
  :config
  (setq ivy-initial-inputs-alist nil))
#+end_src
**** Ivy Core
Setup for ivy, in preparation for counsel.  Turn on ivy-mode just
after init.

Setup vim-like bindings for the minibuffer ("C-(j|k)" for down|up the
selection list).
#+begin_src emacs-lisp
(use-package ivy
  :defer 10
  :general
  (general-def
    :keymaps  'ivy-minibuffer-map
    "M-j"     #'ivy-next-line-or-history
    "M-k"     #'ivy-previous-line-or-history
    "C-c C-e" #'ivy-occur)
  (general-def
    :keymaps  'ivy-switch-buffer-map
    "M-j"     #'ivy-next-line-or-history
    "M-k"     #'ivy-previous-line-or-history)
  :config
  (require 'counsel nil t)
  (setq ivy-height 10
        ivy-wrap t
        ivy-fixed-height-minibuffer t
        ivy-use-virtual-buffers nil
        ivy-virtual-abbreviate 'full
        ivy-on-del-error-function #'ignore
        ivy-use-selectable-prompt t))
#+end_src
**** Counsel etags
Counsel etags allows me to search generated tag files for tags.  I
already have a function defined to generate the tags, so it's just
searching them which I find to be a bit of a hassle, and where this
package comes in.
#+begin_src emacs-lisp
(use-package counsel-etags
  :after counsel
  :general
  (leader "st" #'counsel-etags-find-tag))
#+end_src
*** Company
Company is the auto complete system I use.  I don't like having heavy
setups for company as it only makes it slower to use.  In this case,
just setup some evil binds for company.
#+begin_src emacs-lisp
(use-package company
  :hook
  (prog-mode-hook   . company-mode)
  (eshell-mode-hook . company-mode)
  :general
  (general-def
    :states 'insert
    (kbd "C-SPC") #'company-complete)
  (general-def
    :states '(normal insert)
    "M-j" #'company-select-next
    "M-k" #'company-select-previous))
#+end_src
** Pretty symbols
Prettify symbols mode allows for users to declare 'symbols' that
replace text within certain modes.  For example, you may replace the
'for' word in c-mode in trade of '∀'.  Though this may seem like
useless eye candy, it actually increases my speed of recognition
(recognising symbols is easier than words for many, including
me).

Now here I provide a macro +pretty/set-alist.  This macro works pretty
simply: given a mode hook, as well as a list of pairs typed (text to
substitute, symbol to replace with).  Then I add a hook to the given
mode, setting the prettify-symbols-alist to the symbols given.

I've declared it pretty high up into my config so that the rest of my
packages can leverage it.

#+begin_src emacs-lisp
(use-package prog-mode
  :straight nil
  :init
  (setq prettify-symbols-unprettify-at-point t)
  :config
  (with-eval-after-load "use-package-core"
    (add-to-list 'use-package-keywords ':pretty)
    (defun use-package-normalize/:pretty (_name-symbol _keyword args)
      args)

    (defun use-package-handler/:pretty (name _keyword args rest state)
      (use-package-concat
       (use-package-process-keywords name rest state)
       (let ((arg args)
             forms)
         (while arg
           (let ((mode (car arg))
                 (rest (cdr arg)))
             (add-to-list
              'forms
              `(add-hook
                ',mode
                (lambda ()
                  (setq prettify-symbols-alist ',rest)
                  (prettify-symbols-mode)))))
           (setq arg (cdr arg)))
         forms))))

  (defmacro +pretty/set-alist (mode &rest symbols)
    `(add-hook
      ',mode
      (lambda ()
        (setq prettify-symbols-alist ',symbols)
        (prettify-symbols-mode))))

  (defun +pretty/set-alist-f (mode symbols)
    `(+pretty/set-alist mode ,@symbols)))
#+end_src

Here's a collection of symbols I have currently that may be used
later.
#+begin_example
("null"   . "∅")
("list"   . "ℓ")
("string" . "𝕊")
("true"   . "⊤")
("false"  . "⊥")
("char"   . "ℂ")
("int"    . "ℤ")
("float"  . "ℝ")
("!"      . "¬")
("&&"     . "∧")
("||"      . "∨")
("for"    . "∀")
("return" . "⟼")
("print"  . "ℙ")
("lambda" . "λ")
#+end_example
** Window management
Window management is really important.  I find the default window
handling of Emacs incredibly annoying: sometimes consuming my windows,
sometimes creating new ones.  Of course, as Emacs is a powerful lisp
interpreter, this is easily manageable.

Here I create a few use-package extensions that manages the whole
ordeal of adding a new record to the display-buffer-alist, a useful
abstraction that makes it easy to manage the various buffers created
by packages.
#+begin_src emacs-lisp
(use-package window
  :straight nil
  :general
  (leader
    :infix "b"
    "b" #'switch-to-buffer
    "K" #'kill-buffer
    "j" #'next-buffer
    "k" #'previous-buffer)
  :init
  (with-eval-after-load "use-package-core"
    (add-to-list 'use-package-keywords ':display)
    (defun use-package-normalize/:display (_name-symbol _keyword args)
      args)

    (defun use-package-handler/:display (name _keyword args rest state)
      (use-package-concat
       (use-package-process-keywords name rest state)
       (let ((arg args)
             forms)
         (while arg
           (add-to-list 'forms
                        `(add-to-list 'display-buffer-alist
                                      ',(car arg)))
           (setq arg (cdr arg)))
         forms)))))
#+end_src
*** Setup default display records
Using the =:display= keyword, setup up some =display-buffer-alist=
records.
#+begin_src emacs-lisp
(use-package window
  :straight nil
  :display
  ("\\*\\(Wo\\)?Man.*"
   (display-buffer-at-bottom)
   (window-height . 0.25))

  ("\\*Process List\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25))

  ("\\*compilation\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25))

  ("\\*\\(Ido \\)?Completions\\*"
   (display-buffer-in-side-window)
   (window-height . 0.25)
   (side . bottom))

  ("\\*Async Shell Command\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25)))
#+end_src
** Auto typing
*** Auto typing Preamble
Snippets are a system by which pieces of code can be inserted via
prefixes.  For example, an 'if' snippet would work by first inserting
the word 'if' then pressing some _expansion key_ such as TAB.  This
will insert a set of text that may be have some components that need
to be further filled by the user.

The popular solution is Yasnippet.  Yasnippet is a great package for
snippets, which I use heavily in programming and org-mode.  I setup
here the global mode for yasnippet and a collection of snippets for
ease of use.

However, Emacs provides its own 'auto typing' facilities.  Abbrevs and
skeletons make up the popular solution within Emacs default.  Abbrevs
are for simple expressions wherein there is only one user input (say,
getting today's time which only requires you asking for it).  They
provide a lot of inbuilt functionality and are quite useful.
Skeletons, on the other hand, are for higher level insertions
*** Abbrevs
Just define a few abbrevs for various date-time operations.  Also
define a macro that will assume a function for the expansion, helping
with abstracting a few things away.
#+begin_src emacs-lisp
(use-package abbrev
  :straight nil
  :hook
  (prog-mode-hook . abbrev-mode)
  (text-mode-hook . abbrev-mode)
  :init
  (defmacro +autotyping/deff-abbrev (ABBREV-TABLE ABBREV EXPANSION)
    "Wraps around define-abbrev to fill in some repeated stuff
when expansion is a function."
    `(define-abbrev
       ,ABBREV-TABLE
       ,ABBREV
       ""
       (proc (insert ,EXPANSION))))
  :config
  (+autotyping/deff-abbrev
   global-abbrev-table
   "sdate"
   (format-time-string "%Y-%m-%d" (current-time)))

  (+autotyping/deff-abbrev
    global-abbrev-table
    "stime"
    (format-time-string "%H:%M:%S" (current-time)))

  (+autotyping/deff-abbrev
    text-mode-abbrev-table
    "sday"
    (format-time-string "%A" (current-time)))

  (+autotyping/deff-abbrev
    text-mode-abbrev-table
    "smonth"
    (format-time-string "%B" (current-time))))
#+end_src
*** Skeletons
Defining some basic skeletons and a macro to help generate an abbrev
as well.
#+begin_src emacs-lisp
(use-package skeleton
  :straight nil
  :after abbrev
  :config
  (defmacro +autotyping/gen-skeleton-abbrev (mode abbrev &rest skeleton)
    (let* ((table          (intern (concat (symbol-name mode) "-abbrev-table")))
           (skeleton-name  (intern (concat "+" "skeleton/" (symbol-name mode) "/" abbrev))))
      `(progn
         (define-skeleton
           ,skeleton-name
           ""
           ,@skeleton)
         (define-abbrev ,table
           ,abbrev
           ""
           ',skeleton-name)))))
#+end_src
*** Auto insert
#+begin_src emacs-lisp
(use-package autoinsert
  :straight nil
  :hook (after-init-hook . auto-insert-mode))
#+end_src
*** Yasnippet default
:PROPERTIES:
:header-args:emacs-lisp: :tangle no
:END:
Setup global mode after evil mode has been loaded
#+begin_src emacs-lisp
(use-package yasnippet
  :after evil
  :hook
  (prog-mode-hook . yas-minor-mode)
  (text-mode-hook . yas-minor-mode)
  :general
  (leader
    "i" #'yas-insert-snippet)
  :config
  (yas-load-directory (no-littering-expand-etc-file-name "yasnippet/snippets")))
#+end_src
*** Yasnippet snippets
:PROPERTIES:
:header-args:emacs-lisp: :tangle no
:END:
Collection of snippets, activate after yasnippet has been loaded.
#+begin_src emacs-lisp
(use-package yasnippet-snippets
  :after yasnippet)
#+end_src
* Small packages
** Display line numbers
I don't like using this mode by default, but I'd like to configure it
if possible.
#+begin_src emacs-lisp
(use-package display-line-numbers
  :straight nil
  :defer t
  :general
  (leader
    "tl" #'display-line-numbers-mode)
  :commands display-line-numbers-mode
  :init
  (setq display-line-numbers t))
#+end_src
** Projectile
Setup projectile, along with the tags command.  Also bind "C-c C-p" to
the projectile command map for quick access.
#+begin_src emacs-lisp
(use-package projectile
  :after evil
  :hook (prog-mode-hook . projectile-mode)
  :general
  (leader "p" #'projectile-command-map)
  :init
  (setq projectile-tags-command "ctags -Re -f \"%s\" %s \"%s\"")
  :config
  (projectile-mode))
#+end_src
*** Counsel projectile
:PROPERTIES:
:header-args:emacs-lisp: :tangle no
:END:
Counsel projectile provides the ivy interface to projectile commands, which is really useful.
#+begin_src emacs-lisp
(use-package counsel-projectile
  :after (projectile counsel)
  :config
  (counsel-projectile-mode +1))
#+end_src
** Hydra
Use hydras for stuff that I use often, currently buffer manipulation
#+begin_src emacs-lisp
(use-package hydra
  :after evil
  :init
  (defun dx:kill-defun ()
    "Mark defun then kill it."
    (interactive)
    (mark-defun)
    (delete-active-region t))

  (defun dx:paste-section ()
    "Paste the current kill-region content above section."
    (interactive)
    (open-line 1)
    (yank))

  :config
  (defhydra hydra-buffer (evil-normal-state-map "SPC b")
    "buffer-hydra"
    ("l" next-buffer)
    ("h" previous-buffer)
    ("c" kill-this-buffer))

  (defhydra hydra-goto-chg (evil-normal-state-map "g;")
    "goto-chg"
    (";" goto-last-change "goto-last-change")
    ("," goto-last-change-reverse "goto-last-change-reverse"))

  (defhydra hydra-code-manipulator (global-map "C-x c")
    "code-manip"
    ("j" evil-forward-section-begin)
    ("k" evil-backward-section-begin)
    ("m" mark-defun)
    ("d" dx:kill-defun)
    ("p" dx:paste-section)
    ("TAB" evil-toggle-fold)))
#+end_src
** Avy
Setup avy with leader.  As I use =avy-goto-char-timer= a lot, use the
=M-s= bind.
#+begin_src emacs-lisp
(use-package avy
  :after evil
  :general
  (leader
    :infix "s"
    "l" #'avy-goto-line)
  (general-def
    :states 'normal
    (kbd "M-s") #'avy-goto-char-timer))
#+end_src
** Ace window
Though evil provides a great many features in terms of window
management, much greater than what's easily available in Emacs, ace
window can provide some nicer chords for higher management of windows
(closing, switching, etc).

#+begin_src emacs-lisp
(use-package ace-window
  :after evil
  :custom
  (aw-keys '(?a ?s ?d ?f ?g ?h ?j ?k ?l))
  :general
  (general-def
    :states 'normal
    [remap evil-window-next] #'ace-window))
#+end_src
** Helpful
Basic setup, will be fully integrated in counsel.
#+begin_src emacs-lisp
(use-package helpful
  :general
  (general-def
    [remap describe-function] #'helpful-callable
    [remap describe-variable] #'helpful-variable
    [remap describe-key]      #'helpful-key)
  :display
  ("\\*[Hh]elp.*"
   (display-buffer-at-bottom)
   (inhibit-duplicate-buffer . t)
   (window-height . 0.25))
  :config
  (evil-define-key 'normal helpful-mode-map "q" #'quit-window))
#+end_src
** Which-key
Pretty simple, just activate after init.
#+begin_src emacs-lisp
(use-package which-key
  :config
  (which-key-mode))
#+end_src
** Keychord
Keychord is only really here for this one chord I wish to define: "jk"
for exiting insert state.  Otherwise, I don't really need it.
#+begin_src emacs-lisp
(use-package key-chord
  :after evil
  :config
  (key-chord-define evil-insert-state-map "jk" #'evil-normal-state)
  (key-chord-mode +1))
#+end_src
** (Rip)grep
*** Grep Preamble
Grep is a historical artefact.  It is a searching utility that allows
one to search files for certain regex patterns.  The fact that there
have been so many attempts to replace grep (with some success) only
goes to show how important a tool it is.

Ripgrep is a grep-like utility written in Rust.  It subsumes not only
the ability to search a given file but also to search multiple files
within a directory (which is usually only found by composing the
program find with grep to search multiple files).  Being incredibly
fast through its regex optimisations, it also uses ignore files such
as =.gitignore= to remove files from its searches.

Grep has default Emacs utilities that use a =compilation= style buffer
to search a variety of differing data sets.  =grep= searches files,
=rgrep= searches in a directory using the =find= binary and =zgrep=
searches archives.  This is a great solution for most environments as
most of them will have grep and find installed.  Even when you =ssh=
into a remote machine, they're likely to have these tools.

The ripgrep package provides utilities to ripgrep projects and files
for strings via the rg binary.  Though [[*Ivy][ivy]] comes with =counsel-rg=
using it makes me dependent on the ivy framework, and this
configuration is intentionally built to be modular and switchable.  Of
course, this requires installing the rg binary which is available in
most common repositories nowadays.  In terms of general speed, this is
better.
*** Grep
#+begin_src emacs-lisp
(use-package grep
  :display
  ("grep\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25))
  :straight nil
  :general
  (leader
    "sd" #'rgrep))
#+end_src
*** rg
#+begin_src emacs-lisp
(use-package rg
  :general
  (leader "sr" #'rg)
  (:keymaps 'rg-mode-map
   "]]" #'rg-next-file
   "[[" #'rg-prev-file
   "q"  #'quit-window)
  :init
  (setq rg-group-result t
        rg-hide-command t
        rg-show-columns nil
        rg-show-header t
        rg-custom-type-aliases nil
        rg-default-alias-fallback "all"
        rg-buffer-name "*ripgrep*"))
#+end_src
* Applications
** Mail
*** Mail Preamble
Mail is a funny thing; most people use it just for business or
advertising and it's come out of use in terms of personal
communication in the west for the most part (largely due to "social"
media applications).  However, this isn't true for the open source and
free software movement who heavily use mail for communication.

Integrating mail into Emacs helps as I can send source code and
integrate it into my workflow just a bit better.
*** Notmuch
#+begin_src emacs-lisp
(defconst +mail/signature "---------------\nAryadev Chavali")
(defconst +mail/local-dir (concat user-emacs-directory ".mail/"))

(use-package notmuch
  :commands notmuch
  :general
  (leader "am" #'notmuch)
  :init
  (defun +mail/sync-mail ()
    "Sync mail via mbsync."
    (interactive)
    (start-process-shell-command "" nil "mbsync -a"))
  :custom
  (notmuch-show-logo nil)
  (notmuch-hello-sections '(notmuch-hello-insert-saved-searches notmuch-hello-insert-alltags))
  (mail-signature +mail/signature)
  (mail-default-directory +mail/local-dir)
  (mail-source-directory +mail/local-dir)
  (message-signature +mail/signature)
  (message-auto-save-directory +mail/local-dir)
  (message-directory +mail/local-dir)
  :config
  ;; sync mail after refresh
  (advice-add #'notmuch-poll-and-refresh-this-buffer :before
              #'+mail/sync-mail))
#+end_src
*** Smtpmail
#+begin_src emacs-lisp
(use-package smtpmail
  :after notmuch
  :commands mail-send
  :custom
  (smtpmail-smtp-server "mail.aryadevchavali.com")
  (smtpmail-smtp-user "aryadev")
  (smtpmail-smtp-service 587)
  (smtpmail-stream-type 'starttls)
  :init
  (setq send-mail-function #'smtpmail-send-it
        message-send-mail-function #'smtpmail-send-it))
#+end_src
** Dired
Setup for dired.  Make dired-hide-details-mode the default mode when
using dired-mode, as it removes the clutter.  Setup evil collection
for dired (even though dired doesn't really conflict with evil, there
are some corners I'd like to adjust).
#+begin_src emacs-lisp
(use-package dired
  :straight nil
  :hook (dired-mode-hook . dired-hide-details-mode)
  :general
  (leader
    :infix "d"
    "f" #'find-dired
    "D" #'dired-other-frame
    "d" #'dired-jump)
  :config
  (with-eval-after-load "evil-collection"
    (evil-collection-dired-setup)))
#+end_src
** Xwidget
*** Xwidget Preamble
Xwidget is a package (must be compiled at source) which allows for the
insertion of arbitrary xwidgets into Emacs through buffers.  One of its
premier uses is in navigating the web which it provides through the
function =xwidget-webkit-browse-url=.  This renders a fully functional
web browser within Emacs.

Though I am not to keen on using Emacs to browse the web /via/ xwidget
(EWW does a good job on its own), I am very interested in its
capability to render full fledged web pages which include JavaScript,
as it may come of use when doing web development.  I can see the
results of work very quickly without switching windows or workspaces.
*** Xwidget Core
Define a function =+xwidget/render-file= that reads a file name and
presents it in an xwidget.  If the current file is an HTML file, ask if
user wants to open current file.  Bind it to =aU= in the leader.

#+begin_src emacs-lisp
(use-package xwidget
  :commands +xwidget/render-file
  :straight nil
  :general
  (leader "au" #'xwidget-webkit-browse-url
    "aU" #'+xwidget/render-file)
  (general-def
    :states 'normal
    :keymaps 'xwidget-webkit-mode-map
    "q"         #'quit-window
    "h"         #'xwidget-webkit-scroll-backward
    "j"         #'xwidget-webkit-scroll-up
    "k"         #'xwidget-webkit-scroll-down
    "l"         #'xwidget-webkit-scroll-forward
    (kbd "C-f") #'xwidget-webkit-scroll-up
    (kbd "C-b") #'xwidget-webkit-scroll-down
    "H"         #'xwidget-webkit-back
    "L"         #'xwidget-webkit-forward
    "gu"        #'xwidget-webkit-browse-url
    "gr"        #'xwidget-webkit-reload
    "gg"        #'xwidget-webkit-scroll-top
    "G"         #'xwidget-webkit-scroll-bottom)
  :config
  (defun +xwidget/render-file (&optional FORCE)
    "Find file (or use current file) and render in xwidget."
    (interactive)
    (cond
     ((and (not FORCE) (or (string= (replace-regexp-in-string ".*.html"
                                                           "html" (buffer-name)) "html")
                        (eq major-mode 'web-mode)
                        (eq major-mode 'html-mode))) ; If in html file
      (if (y-or-n-p "Open current file?: ") ; Maybe they want to open a separate file
          (xwidget-webkit-browse-url (format "file://%s" (buffer-file-name)))
        (+xwidget/render-file t))) ; recurse and open file via prompt
     (t
      (xwidget-webkit-browse-url
       (format "file://%s" (read-file-name "Enter file to open: ")))))))
#+end_src
** Eshell
*** Eshell Preamble
Eshell is the integrated shell environment for Emacs.  Though it isn't
necessarily *the best* shell, it really suits the 'integrated
computing environment' moniker that Emacs gets.

It may be argued that Emacs integrates within itself many of the
functionalities that one would use within a shell or terminal.  Stuff
like compilation, file management, large scale text manipulation could
be done through Emacs' own tools (=compile=, =dired= and =occur= come
to mind).  However, I'd argue that eshell's greatest ability comes from
it's separation (or perhaps better phrased, *integration*) of two
'parsers': the Lisp parser and the Shell parser.  With these parsers
you can mix and match at will for use in the shell, which grants
greater power than many shells I know of.

*** Eshell Core
Setup a function that /toggles/ the eshell window rather than
just opening it via =+dx/toggle-buffer=.
Along with that setup the prompt so it looks a bit nicer and add
pretty symbols to eshell.
#+begin_src emacs-lisp
(use-package eshell
  :commands +shell/toggle-shell
  :display
  ("\\*e?shell\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25))
  :general
  (leader
    "tt" #'+shell/toggle-eshell)
  :init
  (with-eval-after-load "prog-mode"
    (+pretty/set-alist
     eshell-mode-hook
     ("lambda"  . "λ")
     ("numberp" . "ℤ")
     ("t"       . "𝕋")
     ("nil"     . "∅")))

  (add-hook
   'eshell-mode-hook
   (proc
    (interactive)
    (general-def
      :states '(insert normal)
      :keymaps 'eshell-mode-map
      "C-l" #'eshell/clear-scrollback
      "C-j" #'eshell-next-matching-input-from-input
      "C-k" #'eshell-previous-matching-input-from-input)))
  :config
  (setq eshell-cmpl-ignore-case t
        eshell-cd-on-directory t
        eshell-prompt-function
        (proc
         (concat
          (format "[%s]\n" (abbreviate-file-name (eshell/pwd)))
          "λ "))
        eshell-prompt-regexp "^λ ")

  (+dx/create-toggle-function
   +shell/toggle-eshell
   "*eshell*"
   eshell))
#+end_src
** Elfeed
Elfeed is the perfect RSS feed reader, integrated into Emacs
perfectly.  I've got a set of feeds that I use for a large variety of
stuff, mostly media and entertainment.  I've also bound "<leader> ar"
to elfeed for loading the system.
#+begin_src emacs-lisp
(use-package elfeed
  :general
  (leader "ar" #'elfeed)
  (general-def
    :states 'normal
    :keymaps 'elfeed-search-mode-map
    "gr"       #'elfeed-update
    "s"        #'elfeed-search-live-filter
    "<return>" #'elfeed-search-show-entry)
  :init
  (setq elfeed-db-directory (no-littering-expand-var-file-name "elfeed/"))
  (setq +rss/feed-urls
        '(("Arch Linux"
           "https://www.archlinux.org/feeds/news/"
           Linux)
          ("LEMMiNO"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UCRcgy6GzDeccI7dkbbBna3Q"
           YouTube Stories)
          ("The Onion"
           "https://www.theonion.com/rss"
           Social)
          ("Dark Sominium"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UC_e39rWdkQqo5-LbiLiU10g"
           YouTube Stories)
          ("Dark Sominium Music"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UCkLiZ_zLynyNd5fd62hg1Kw"
           YouTube Music)
          ("Nexpo"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UCpFFItkfZz1qz5PpHpqzYBw"
           YouTube)
          ("Techquickie"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UC0vBXGSyV14uvJ4hECDOl0Q"
           YouTube)
          ("Captain Sinbad"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UC8XKyvQ5Ne_bvYbgv8LaIeg"
           YouTube)
          ("3B1B"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UCYO_jab_esuFRV4b17AJtAw"
           YouTube)
          ("Fredrik Knusden"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UCbWcXB0PoqOsAvAdfzWMf0w"
           YouTube Stories)
          ("Barely Sociable"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UC9PIn6-XuRKZ5HmYeu46AIw"
           YouTube Stories)
          ("Atrocity Guide"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UCn8OYopT9e8tng-CGEWzfmw"
           YouTube Stories)
          ("Philip Defranco"
           "https://www.youtube.com/feeds/videos.xml?channel_id=UClFSU9_bUb4Rc6OYfTt5SPw"
           YouTube News)
          ("Hacker News"
           "http://morss.aryadevchavali.com/news.ycombinator.com/rss"
           Social)
          ("Hacker Factor"
           "https://www.hackerfactor.com/blog/index.php?/feeds/index.rss2"
           Social)
          ("BBC Top News"
           "http://morss.aryadevchavali.com/feeds.bbci.co.uk/news/rss.xml"
           News)
          ("BBC Tech News"
           "http://morss.aryadevchavali.com/feeds.bbci.co.uk/news/technology/rss.xml"
           News)))
  :config
  (with-eval-after-load "evil-collection"
    (evil-collection-elfeed-setup))
  (setq elfeed-feeds (cl-map 'list #'(lambda (item)
                                       (append (list (nth 1 item)) (cdr (cdr item))))
                             +rss/feed-urls)))
#+end_src
** Magit
Magit is *the* git porcelain for Emacs, which perfectly encapsulates
the git cli.  In this case, I just need to setup the bindings for it.
As magit will definitely load after evil (as it must be run by a
binding, and evil will load after init), I can use evil-collection
freely.  Also, define an auto insert for commit messages so that I
don't need to write everything myself.

#+begin_src emacs-lisp
(use-package magit
  :display
  ("magit:.*"
   (display-buffer-same-window)
   (inhibit-duplicate-buffer . t))
  ("magit-diff:.*"
   (display-buffer-below-selected))
  ("magit-log:.*"
   (display-buffer-same-window))
  :general
  (leader "g" #'magit-status)
  :init
  (setq magit-completing-read-function 'magit-ido-completing-read
        vc-follow-symlinks t)
  (with-eval-after-load "autoinsert"
    (define-auto-insert '("COMMIT_EDITMSG" , "Commit")
      '(nil
        "(" (read-string "Enter feature/module: ") ")"
        (read-string "Enter simple description: ") "\n\n"
        _))))

(use-package evil-magit
  :after magit
  :config
  (evil-magit-init))
#+end_src
** IBuffer
#+begin_src emacs-lisp
(use-package ibuffer
  :after evil
  :general
  (leader
    "bi" #'ibuffer))
#+end_src
** Proced
Proced is the process manager for Emacs.  Just setup evil-collection
for it.
#+begin_src emacs-lisp
(use-package proced
  :straight nil
  :general
  (leader
    "ap" #'proced)
  :display
  ("\\*Proced\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25)))
#+end_src
** Calculator
Surprise, surprise Emacs comes with a calculator.  At this point there
is little that surprises me in terms of Emacs' amazing capabilities.

=calc-mode= is a calculator system within Emacs that provides an
incredible array of mathematical operations.  It uses reverse polish
notation to do calculations (though there is a standard infix
algebraic notation mode) and provides incredible utilities.

#+begin_src emacs-lisp
(use-package calc
  :straight nil
  :general
  (leader
    "ac" #'calc)
  :init
  (setq calc-algebraic-mode t))
#+end_src
*** Calctex
=calc-mode= also has a 3rd party package called =calctex=. It renders
mathematical expressions within calc as if they were rendered in TeX.
You can also copy the expressions in their TeX forms, which is pretty
useful when writing a paper.  I've set a very specific lock on this
repository as it's got quite a messy work-tree and this commit seems to
work for me given the various TeX utilities installed via Arch.

#+begin_src emacs-lisp
(use-package calctex
  :after calc
  :straight (calctex :type git :host github :repo "johnbcoughlin/calctex")
  :hook (calc-mode-hook . calctex-mode))
#+end_src
** Ledger
#+begin_src emacs-lisp
(use-package ledger-mode
  :defer t
  :display
  ("\\*Ledger Report\\*"
   (display-buffer-pop-up-frame)))

(use-package evil-ledger
  :after ledger-mode)
#+end_src
* Major modes, programming and text
Setups for common major modes and languages.
** General Text Configuration
Standard packages and configurations for the text-mode.  These
configurations are usually further placed on
*** Flyspell
Flyspell allows me to quickly spell check text documents.  I use
flyspell primarily in org mode, as that is my preferred prose writing
software, but I also need it in commit messages and so on.  So
flyspell-mode should be hooked to text-mode.
#+begin_src emacs-lisp
(use-package flyspell
  :hook (text-mode-hook . flyspell-mode)
  :general
  (general-def
    :states 'normal
    :keymaps 'text-mode-map
    (kbd "M-a") #'flyspell-correct-word-before-point
    (kbd "M-A") #'flyspell-auto-correct-word))
#+end_src
*** White space
Deleting whitespace, highlighting when going beyond the 80th character
limit, all good stuff.

I don't want to highlight whitespace for general mode categories
(Emacs lisp shouldn't really have an 80 character limit; it's a bit of
a wild gun), so set it for specific modes I find need the help.
#+begin_src emacs-lisp
(use-package whitespace
  :straight nil
  :general
  (general-def
    :states 'normal
    "M--"   #'whitespace-cleanup)
  :hook
  (before-save-hook  . whitespace-cleanup)
  (c-mode-hook       . whitespace-mode)
  (c++-mode-hook     . whitespace-mode)
  (haskell-mode-hook . whitespace-mode)
  (python-mode-hook  . whitespace-mode)
  :init
  (setq whitespace-style '(face lines-tail tabs tab-mark trailing newline)
        whitespace-line-column 80))
#+end_src
*** Set auto-fill-mode for all text-modes
Auto fill mode is nice for most text modes, 80 char limit is great.
#+begin_src emacs-lisp
(add-hook 'text-mode-hook #'auto-fill-mode)
#+end_src
*** Smartparens
Smartparens is a smarter electric-parens, it's much more aware of
stuff and easier to use.
#+begin_src emacs-lisp
(use-package smartparens
  :hook
  (prog-mode-hook . smartparens-mode)
  (text-mode-hook . smartparens-mode)
  :after evil
  :config
  (setq sp-highlight-pair-overlay nil
        sp-highlight-wrap-overlay t
        sp-highlight-wrap-tag-overlay t)

  (let ((unless-list '(sp-point-before-word-p
                       sp-point-after-word-p
                       sp-point-before-same-p)))
    (sp-pair "'"  nil :unless unless-list)
    (sp-pair "\"" nil :unless unless-list))
  (sp-local-pair sp-lisp-modes "(" ")" :unless '(:rem sp-point-before-same-p))
  (require 'smartparens-config))
#+end_src
*** Show-paren-mode
Show parenthesis for Emacs
#+begin_src emacs-lisp
(add-hook 'prog-mode-hook #'show-paren-mode)
#+end_src
** General Programming Configuration
*** Eldoc
Eldoc presents documentation to the user upon placing ones cursor upon
any symbol.  This is very useful when programming as it:
- presents the arguments of functions while writing calls for them
- presents typing and documentation of variables

#+begin_src emacs-lisp
(use-package eldoc
  :straight nil
  :hook (prog-mode-hook . eldoc-mode)
  :init
  (global-eldoc-mode 1))

(use-package eldoc-box
  :hook (eldoc-mode-hook . eldoc-box-hover-mode)
  :init
  (setq eldoc-box-position-function #'eldoc-box--default-upper-corner-position-function
        eldoc-box-clear-with-C-g t))
#+end_src
*** Eglot
Eglot is a library of packages to communicate with LSP servers for
better programming capabilities.  Interactions with a server provide
results to the client, done through JSON.
#+begin_src emacs-lisp
(use-package eglot
  :after project
  :defer t
  :hook
  (c++-mode-hook    . eglot-ensure)
  (c-mode-hook      . eglot-ensure)
  (python-mode-hook . eglot-ensure)
  :general
  (leader
    :keymaps 'eglot-mode-map
    :infix "c"
    "f" #'eglot-format
    "a" #'eglot-code-actions
    "r" #'eglot-rename
    "R" #'eglot-reconnect)
  :init
  (setq eglot-stay-out-of '(flymake)))
#+end_src
*** Flycheck
Flycheck is the checking system for Emacs.  I don't necessarily like
having all my code checked all the time, so I haven't added a hook to
prog-mode as it would be better for me to decide when I want checking
and when I don't.

#+begin_src emacs-lisp
(use-package flycheck
  :commands (flycheck-mode flycheck-list-errors)
  :general
  (leader
    "tf" #'flycheck-mode
    "cx" #'flycheck-list-errors)
  :display
  ("\\*Flycheck.*"
   (display-buffer-at-bottom)
   (window-height . 0.25))
  :config
  (with-eval-after-load "evil-collection"
    (evil-collection-flycheck-setup)))
#+end_src
*** Tabs and spaces
By default, turn off tabs and set the tab width to two.
#+begin_src emacs-lisp
(setq-default indent-tabs-mode nil
              tab-width 2)
#+end_src

However, if necessary later, define a function that may activate tabs locally.
#+begin_src emacs-lisp
(defun dx:activate-tabs ()
  (interactive)
  (setq-local indent-tabs-mode t))
#+end_src
*** Colourising compilation
Colourising the compilation buffer so ansi color codes get computed.
#+begin_src emacs-lisp
(use-package compile
  :defer t
  :straight nil
  :config
  (defun +compile/colourise ()
    "Colourise the emacs compilation buffer."
    (let ((inhibit-read-only t))
      (ansi-color-apply-on-region (point-min) (point-max))))
  (add-hook 'compilation-filter-hook #'+compile/colourise))
#+end_src
** PDF
*** PDF Preamble
PDFs are a great format for (somewhat) immutable text and reports with
great formatting options.  Though Emacs isn't really the premier
solution for viewing PDFs (I highly recommend [[https://pwmt.org/projects/zathura/][Zathura]]), similar to
most things with Emacs, having a PDF viewer builtin can be a very
useful asset.

For example if I were editing an org document which I was eventually
compiling into a PDF, my workflow would be much smoother with a PDF
viewer within Emacs that I can open on another pane.

Furthermore many governmental studies and essays use the PDF
format.  If I were to be analysing them in a study or project (for
example, programming a tool using data from them), which I will most
definitely be using Emacs for, having a PDF pane open for occasional
viewing can be very useful.

*** PDF Tools
=pdf-tools= provides the necessary functionality for viewing
PDFs.  There is no PDF viewing without this package.  =evil-collection=
provides a setup for this mode, so use that.
#+begin_src emacs-lisp
(use-package pdf-tools
  :mode ("\\.[pP][dD][fF]" . pdf-view-mode)
  :config
  (with-eval-after-load "evil-collection"
    (evil-collection-pdf-setup)))
#+end_src
*** PDF grep
PDF grep is a Linux tool that allows for searches against PDFs similar
to standard grep (but for PDFs!).  It's a bit badly configured (why not
use the current buffer?) but it works out.
#+begin_src emacs-lisp
(use-package pdfgrep
  :after pdf-tools
  :hook (pdf-view-mode-hook . pdfgrep-mode)
  :general
  (general-def
    :states  'normal
    :keymaps 'pdf-view-mode-map
    "M-g"    #'pdfgrep))
#+end_src
** Org
*** Org Core Variables
Tons of variables for org-mode, including a ton of latex ones.
#+begin_src emacs-lisp
(use-package org
  :defer t
  :custom
  (org-agenda-files `(,(expand-file-name "~/Text/general.org")))
  (org-agenda-window-setup 'current-window)
  (org-edit-src-content-indentation 0)
  (org-goto-interface 'outline)
  (org-src-window-setup 'current-window)
  (org-indirect-buffer-display 'current-window)
  (org-eldoc-breadcrumb-separator " → ")
  (org-enforce-todo-dependencies t)
  (org-fontify-quote-and-verse-blocks t)
  (org-fontify-whole-heading-line t)
  (org-footnote-auto-label 'plain)
  (org-hide-leading-stars t)
  (org-hide-emphasis-markers nil)
  (org-image-actual-width nil)
  (org-priority-faces '((?A . error) (?B . warning) (?C . success)))
  (org-startup-indented t)
  (org-tags-column 0)
  (org-todo-keywords
   '((sequence "TODO" "WAIT" "DONE")
     (sequence "PROJ" "WAIT" "COMPLETE")))
  (org-use-sub-superscripts '{})
  (org-babel-load-languages '((emacs-lisp . t)
                              (C . t)))
  (org-latex-listings 'minted)
  (org-latex-minted-langs '((emacs-lisp "common-lisp")
                            (ledger "text")
                            (cc "c++")
                            (cperl "perl")
                            (shell-script "bash")
                            (caml "ocaml")))
  (org-latex-packages-alist '(("" "minted")))
  (org-latex-pdf-process
   '("%latex -interaction nonstopmode -shell-escape -output-directory %o %f"
     "%latex -interaction nonstopmode -shell-escape -output-directory %o %f"
     "%latex -interaction nonstopmode -shell-escape -output-directory %o %f"))
  (org-latex-minted-options '(("style" "xcode")
                              ("linenos")
                              ("frame" "single")
                              ("mathescape")
                              ("fontfamily" "courier")
                              ("samepage" "false")
                              ("breaklines" "true")
                              ("breakanywhere" "true")
                              )))
#+end_src
*** Org Core Configuration
Hooks, prettify-symbols and my =+org/swiper-goto= to replace the
vanilla =org-goto=.  Also records for auto insertion.
#+begin_src emacs-lisp
(use-package org
  :hook
  (org-mode-hook . prettify-symbols-mode)
  :display
  ("\\*Org Src.*"
   (display-buffer-same-window))
  :init
  (with-eval-after-load "prog-mode"
    (+pretty/set-alist
     org-mode-hook
     ("#+begin_src" . "≫")
     ("#+end_src"   . "≪")))
  (with-eval-after-load "autoinsert"
    (define-auto-insert '("\\.org" . "Org skeleton")
      '("Enter title: "
        "#+title: " str | (buffer-file-name) "\n"
        "#+author: " user-full-name "\n"
        "#+description: " (read-string "Enter description: ") | "Description" "\n"
        "#+options: toc:nil\n\n"
        "#+begin_center\n"
        (read-string "Enter further preamble: ")
        "#+end_center\n"
        "#+latex: \clearpage\n"
        "#+toc: headlines\n"
        "#+latex: \clearpage\n\n"
        "* " _)))
  :config
  (with-eval-after-load "swiper"
    (defun +org/swiper-goto ()
      (interactive)
      (swiper "^\\* "))
    (general-def
      [remap org-goto] #'+org/swiper-goto)))
#+end_src
*** Org Core Bindings
Some bindings for org mode.
#+begin_src emacs-lisp
(use-package org
  :general
  (leader
    "aa" #'org-agenda
    "fa" (proc (interactive) (find-file (car org-agenda-files))))
  (general-def
    :states 'normal
    :keymaps 'org-mode-map
    "C-c ;"  #'org-property-action))
#+end_src
*** Org message
Org message allows for the use of org mode when composing mails,
generating HTML multipart emails.  This integrates the WYSIWYG
experience into mail in Emacs while also providing powerful text
features with basically no learning curve (as long as you've already
learnt the basics of org).

#+begin_src emacs-lisp
(use-package org-msg
  :hook
  (message-mode-hook . org-msg-mode)
  :config
  (setq org-msg-options "html-postamble:nil H:5 num:nil ^:{} toc:nil author:nil email:nil \\n:t tex:dvipng"
        org-msg-greeting-fmt "Dear %s,\n"
        org-msg-greeting-name-limit 3
        org-msg-text-plain-alternative t)

  (add-to-list 'org-msg-enforce-css
               '(img latex-fragment-inline
                     ((transform . ,(format "translateY(-1px) scale(%.3f)"
                                            (/ 1.0 (if (boundp 'preview-scale)
                                                       preview-scale 1.4))))
                      (margin . "0 -0.35em")))))
#+end_src
*** Evil Org
Evil org for some nice bindings.
#+begin_src emacs-lisp
(use-package evil-org
  :hook (org-mode-hook . evil-org-mode))
#+end_src
*** Org reveal
Org reveal allows one to export org files as HTML presentations via
reveal.js.  Pretty nifty and it's easy to use.
#+begin_src emacs-lisp
(use-package ox-reveal
  :after org
  :init
  (setq org-reveal-root "https://cdn.jsdelivr.net/npm/reveal.js"
        org-reveal-theme "sky"))
#+end_src
*** Org fragtog
Toggle latex fragments in org mode so you get fancy maths symbols.  I
use latex a bit in org mode as it is the premier way of getting
mathematical symbols and text rendered and compiled, but org mode >
latex.

As Org mode has the ability to accept arbitrary inputs of Latex
(through escaped (square) brackets), allowing me to observe how they
look is nice to have.
#+begin_src emacs-lisp
(use-package org-fragtog
  :hook (org-mode-hook . org-fragtog-mode))
#+end_src
*** Org pretty tables
Make the default ASCII tables of org mode pretty with
#+begin_src emacs-lisp
(use-package org-pretty-table
  :straight (org-pretty-table-mode :type git :host github :repo "Fuco1/org-pretty-table")
  :hook (org-mode-hook . org-pretty-table-mode))
#+end_src
*** Org pretty tags
#+begin_src emacs-lisp
(use-package org-pretty-tags
  :hook (org-mode-hook . org-pretty-tags-mode))
#+end_src
*** Org superstar
Org superstar adds cute little unicode symbols for headers, much
better than the default asterisks.
#+begin_src emacs-lisp
(use-package org-superstar
  :hook (org-mode-hook . org-superstar-mode))
#+end_src
** C/C++
Setup for C and C++ modes via the cc-mode package.
*** C/C++ Preamble
C and C++ are great languages for general purpose programming.  Though
lisp is more aesthetically and mentally pleasing, they get the job
done.  Furthermore, they provide speed and finer control in trade of
aesthetics and security-based abstractions.

When writing C/C++ code, I use folds and section manipulation quite a
bit so observing folds is quite important for me when considering a
codebase.  Thus, I observed the two main styles of brace placement and
how they do folds.

#+begin_src c :tangle no
if (cond) {...}
#+end_src
vs
#+begin_src c :tangle no
if (cond)
{....}
#+end_src

I don't print my code, nor am I absolutely pressed for screen real
estate in terms of height (such that newlines matter).  Width matters
to me as I do use Emacs multiplexing capabilities often.  Thus, with
these in mind the open brace style is a better option than the
opposing style.

Also, with large code bases consistency is important.  I personally use
tabs as they are more accessible: anyone can set their tab width such
that it best suits them.  Furthermore, tabs produce smaller source
files.  However, this isn't set in stone and I will return to no tabs
when needed in projects.  Also auto fill mode makes splitting my window
bearable; all text can fit on the screen.
*** Configuration
#+begin_src emacs-lisp
(use-package cc-mode
  :defer t
  :hook
  (c-mode-hook   . auto-fill-mode)
  (c++-mode-hook . auto-fill-mode)
  :init
  (setq-default c-basic-offset 2)
  (setq c-default-style '((java-mode . "java")
                          (awk-mode . "awk")
                          (other . "user")))

  (with-eval-after-load "prog-mode"
    (+pretty/set-alist
     c-mode-hook
     ("puts"    . "ℙ")
     ("fputs"   . "ϕ")
     ("printf"  . "ω")
     ("fprintf" . "Ω")
     ("->"      . "→")
     ("NULL"    . "∅")
     ("true"    . "⊤")
     ("false"   . "⊥")
     ("char"    . "ℂ")
     ("int"     . "ℤ")
     ("float"   . "ℝ")
     ("!"       . "¬")
     ("&&"      . "∧")
     ("||"      . "∨")
     ("for"     . "∀")
     ("return"  . "⟼"))

    (+pretty/set-alist
     c++-mode-hook
     ("nullptr"     . "∅")
     ("std::string" . "𝕊")
     ("string"      . "𝕊")
     ("vector"      . "ℓ")
     ("puts"        . "ℙ")
     ("fputs"       . "ϕ")
     ("printf"      . "ω")
     ("fprintf"     . "Ω")
     ("->"          . "→")
     ("NULL"        . "∅")
     ("true"        . "⊤")
     ("false"       . "⊥")
     ("char"        . "ℂ")
     ("int"         . "ℤ")
     ("float"       . "ℝ")
     ("!"           . "¬")
     ("&&"          . "∧")
     ("||"          . "∨")
     ("for"         . "∀")
     ("return"      . "⟼")))
  :config
  (c-add-style
   "user"
   '((c-basic-offset . 2)
     (c-comment-only-line-offset . 0)
     (c-hanging-braces-alist (brace-list-open)
                             (brace-entry-open)
                             (substatement-open after)
                             (block-close . c-snug-do-while)
                             (arglist-cont-nonempty))
     (c-cleanup-list brace-else-brace)
     (c-offsets-alist
      (statement-block-intro . +)
      (knr-argdecl-intro . 0)
      (substatement-open . 0)
      (substatement-label . 0)
      (access-label . -)
      (inline-open  . 0)
      (label . 0)
      (statement-cont . +)))))
#+end_src
*** Clang format
Clang format for when:
- eglot isn't working/I'm not running it
- eglot format is bad

#+begin_src emacs-lisp
(use-package clang-format
  :after cc-mode
  :config
  (bind-key "C-c '" #'clang-format-region c-mode-map)
  (bind-key "C-c '" #'clang-format-region c++-mode-map))
#+end_src
** Haskell
Haskell is a static lazy functional programming language (what a
mouthful).  It's quite a beautiful language and really learning it will
change the way you think about programming.

Here I configure the REPL for Haskell via the
=interactive-haskell-mode= as well.
#+begin_src emacs-lisp
(use-package haskell-mode
  :hook
  (haskell-mode-hook . haskell-indentation-mode)
  (haskell-mode-hook . interactive-haskell-mode)
  :general
  (leader
    "th" #'+shell/toggle-haskell-repl)
  :display
  ("\\*haskell\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25))
  :config
  (+dx/create-toggle-function
   +shell/toggle-haskell-repl
   "*haskell*"
   haskell-process-restart))
#+end_src
** Python
Basic, haven't used python in this configuration yet.
#+begin_src emacs-lisp
(use-package python
  :defer t
  :straight nil
  :init
  (setq python-indent-offset 4)
  :config
  (+pretty/set-alist
   python-mode-hook
   ("None"   . "∅")
   ("list"   . "ℓ")
   ("List"   . "ℓ")
   ("str"    . "𝕊")
   ("True"   . "⊤")
   ("False"  . "⊥")
   ("int"    . "ℤ")
   ("float"  . "ℝ")
   ("not"    . "¬")
   ("and"    . "∧")
   ("or"     . "∨")
   ("for"    . "∀")
   ("print"  . "ℙ")
   ("lambda" . "λ")
   ("return" . "⟼")
   ("yield"  . "⟻")))
#+end_src
*** Python shell
Setup for python shell, including a toggle option
#+begin_src emacs-lisp
(use-package python
  :straight nil
  :commands +python/toggle-repl
  :general
  (leader
    "tp" #'+python/toggle-repl)
  :display
  ("\\*Python\\*"
   (display-buffer-at-bottom)
   (window-height . 0.25))
  :config
  (+dx/create-toggle-function +python/toggle-repl
                              "*Python*"
                              run-python))
#+end_src
** YAML
YAML is a data language which is useful for config files.
#+begin_src emacs-lisp
(use-package yaml-mode
  :straight t)
#+end_src
** HTML/CSS/JS
Firstly, web mode for consistent colouring of syntax.
#+begin_src emacs-lisp
(use-package web-mode
  :mode ("\\.html" . web-mode)
  :mode ("\\.js"   . web-mode)
  :mode ("\\.css"  . web-mode)
  :custom
  ((web-mode-markup-indent-offset 2)
   (web-mode-css-indent-offset 2)))
#+end_src

Then emmet for super speed
#+begin_src emacs-lisp
(use-package emmet-mode
  :hook (web-mode-hook . emmet-mode)
  :general
  (general-def
    :states 'insert
    :keymaps 'emmet-mode-keymap
    "TAB" #'emmet-expand-line
    "M-j" #'emmet-next-edit-point
    "M-k" #'emmet-prev-edit-point))
#+end_src
** Emacs lisp
Add a new lisp indent function which indents newline lists more
appropriately.
#+begin_src emacs-lisp
(use-package lisp-mode
  :straight nil
  :init
  (with-eval-after-load "prog-mode"
    (+pretty/set-alist
     emacs-lisp-mode-hook
     ("lambda"  . "λ")
     ("numberp" . "ℤ")
     ("t"       . "𝕋")
     ("nil"     . "∅")
     ("and"     . "∧")
     ("or"      . "∨")
     ("defun"   . "ƒ")
     ("for"     . "∀")
     ("mapc"    . "∀")
     ("mapcar"  . "∀")))
  :config
  (defun +modded/lisp-indent-function (indent-point state)
    (let ((normal-indent (current-column))
          (orig-point (point)))
      (goto-char (1+ (elt state 1)))
      (parse-partial-sexp (point) calculate-lisp-indent-last-sexp 0 t)
      (cond
       ;; car of form doesn't seem to be a symbol, or is a keyword
       ((and (elt state 2)
             (or (not (looking-at "\\sw\\|\\s_"))
                 (looking-at ":")))
        (if (not (> (save-excursion (forward-line 1) (point))
                    calculate-lisp-indent-last-sexp))
            (progn (goto-char calculate-lisp-indent-last-sexp)
                   (beginning-of-line)
                   (parse-partial-sexp (point)
                                       calculate-lisp-indent-last-sexp 0 t)))
        ;; Indent under the list or under the first sexp on the same
        ;; line as calculate-lisp-indent-last-sexp.  Note that first
        ;; thing on that line has to be complete sexp since we are
        ;; inside the innermost containing sexp.
        (backward-prefix-chars)
        (current-column))
       ((and (save-excursion
               (goto-char indent-point)
               (skip-syntax-forward " ")
               (not (looking-at ":")))
             (save-excursion
               (goto-char orig-point)
               (looking-at ":")))
        (save-excursion
          (goto-char (+ 2 (elt state 1)))
          (current-column)))
       (t
        (let ((function (buffer-substring (point)
                                          (progn (forward-sexp 1) (point))))
              method)
          (setq method (or (function-get (intern-soft function)
                                         'lisp-indent-function)
                           (get (intern-soft function) 'lisp-indent-hook)))
          (cond ((or (eq method 'defun)
                     (and (null method)
                          (> (length function) 3)
                          (string-match "\\`def" function)))
                 (lisp-indent-defform state indent-point))
                ((integerp method)
                 (lisp-indent-specform method state
                                       indent-point normal-indent))
                (method
                 (funcall method indent-point state))))))))
  (add-hook 'emacs-lisp-mode-hook (proc (interactive) (setq-local lisp-indent-function #'+modded/lisp-indent-function))))
#+end_src