diff options
Diffstat (limited to 'Emacs/.config/emacs')
| -rw-r--r-- | Emacs/.config/emacs/config.org | 279 |
1 files changed, 134 insertions, 145 deletions
diff --git a/Emacs/.config/emacs/config.org b/Emacs/.config/emacs/config.org index 41951d8..e7955c6 100644 --- a/Emacs/.config/emacs/config.org +++ b/Emacs/.config/emacs/config.org @@ -42,9 +42,8 @@ Let's setup a few things: (global-auto-revert-mode)) #+end_src * Custom functionality -Functions that don't require a packages to work other than Emacs, -which means I can define them early. These are used much later in the -config. +Some Lisp I wrote that only depends on Emacs to provide some custom +functionality. ** WAIT Toggle buffer :PROPERTIES: :header-args:emacs-lisp: :tangle no @@ -91,7 +90,7 @@ via C-u. Mostly used in Eshell." (display-buffer buffer) (select-window (get-buffer-window buffer)))))))) #+end_src -** Auto-run command after-save-hook +** Automatically run a command on saving Define a macro which creates hooks into the ~after-save-hook~. On certain ~conditions~ being met, ~to-run~ is evaluated. #+begin_src emacs-lisp @@ -99,12 +98,12 @@ certain ~conditions~ being met, ~to-run~ is evaluated. :defer t :config (defmacro +oreo/create-auto-save (conditions &rest to-run) - "Create a hook for after saves, where (on CONDITIONS being met) -TO-RUN is evaluated. " - `(add-hook 'after-save-hook #'(lambda () - (interactive) - (when ,conditions - ,@to-run))))) + "Create a hook for after saves, where on CONDITIONS being met +TO-RUN is evaluated." + `(add-hook 'after-save-hook + #'(lambda () + (interactive) + (when ,conditions ,@to-run))))) #+end_src ** Procedure A ~lambda~ which takes no arguments is a procedure. This macro @@ -112,7 +111,6 @@ generates procedures, with the parameters of the macro being the body of the procedure. It returns it in quoted form, as that is the most common use of this macro. -(You may notice ~proc~ is used where the return value is irrelevant). #+begin_src emacs-lisp (defmacro proc (&rest BODY) "For a given list of forms BODY, return a quoted 0 argument @@ -120,10 +118,12 @@ lambda." `(quote (lambda nil ,@BODY))) #+end_src ** System specificity -A macro that acts as a switch case on ~(system-name)~ which allows the -writing of system specific code. For me this is for my desktop and -laptop, particularly for font sizes. Though there may be an easier -solution than this, this seems simple enough. +A macro that acts as a switch case on ~(system-name)~ which so a user +can write code for each possible host. For me this is for my desktop +and laptop, particularly for font sizes. Though there may be an +easier solution than this, this seems simple enough. + +Note the check for the symbol ~otherwise~ which is the default case. #+begin_src emacs-lisp (defmacro +oreo/sys-name-cond (&rest pairs) "Switch case on result of function `system-name'. @@ -131,36 +131,35 @@ solution than this, this seems simple enough. Each pair in PAIRS is typed as: (string . (forms...)) where the string represents the system name to test, and forms being the consequence if true." - `(cond - ,@(mapcar #'(lambda (pair) - ;; (str . forms..) -> ((string= str (system-name)) - ;; forms...) - (let ((name (car pair)) - (body (cdr pair))) - `((string= ,name (system-name)) ,@body))) - pairs))) -#+end_src - + `(cond ,@(mapcar + #'(lambda (pair) + (cl-destructuring-bind (name . body) pair + (if (eq name 'otherwise) + `(t ,@body) + `((string= (system-name) ,name) ,@body)))) + pairs))) +#+end_src +*** Setting number of native jobs In [[file:early-init.el][early-init.el]] I set the number of native-workers to 4, which isn't necessarily optimal when loading/compiling the rest of this file depending on the machine I use: -- On my laptop (=spiderboy=) I'd prefer to have it use 2-3 threads so +- On my laptop (=newboy=) I'd prefer to have it use 2-3 threads so I can actually use the rest of the laptop while waiting for compilation - On my desktop (=oldboy=) I'd prefer to use 4-6 threads as I can afford more, so I can get a faster load up. #+begin_src emacs-lisp -(+oreo/sys-name-cond - ("spiderboy" - (setq native-comp-async-jobs-number 3)) - ("oldboy" - (setq native-comp-async-jobs-number 6))) +(use-package comp + :init + (+oreo/sys-name-cond + ("newboy" + (setq native-comp-async-jobs-number 3)) + ("oldboy" + (setq native-comp-async-jobs-number 6)))) #+end_src ** Clean buffer list -Instead of cleaning my buffer list manually, selectively preserving -some fixed set of buffers, this function does it for me. Preserves -any buffers in ~+oreo/keep-buffer~ and kills the rest. +Clean all buffers excluding those in ~+oreo/keep-buffers~. #+begin_src emacs-lisp (defconst +oreo/keep-buffers (list "config.org" "*scratch*" @@ -179,12 +178,13 @@ any buffers in ~+oreo/keep-buffer~ and kills the rest. * Aesthetics General look and feel of Emacs (mostly disabling stuff I don't like). ** Themes +I have both a dark and light theme for differing situations. *** Dark theme My preferred dark theme is my own "personal-primary" theme which is stored in the Emacs lisp folder (look at [[file:elisp/personal-primary-theme.el][this file]]). It tries to use -the primary colours for everything, leading to a colour -> meaning -relation. +the primary colours for everything, which makes it quite simple to +look at. I have an older version of this theme that uses a homogeneous colour scheme ([[file:elisp/personal-theme.el][this file]]) @@ -196,12 +196,13 @@ scheme ([[file:elisp/personal-theme.el][this file]]) :config (load-theme 'personal-primary t)) #+end_src -*** Light theme +*** Switching between light and dark I'm not very good at designing light themes as I don't really use them. However they are necessary in high light situations where a dark mode would strain the eyes too much. So I built a custom theme -on top of the default Emacs theme, "personal-light" (look at -[[file:elisp/personal-light-theme.el][this file]]). +on top of the default Emacs theme, "personal-light". + +2024-06-11: I now use modus-operandi for my light theme. I don't use it by default but I may need to switch between light and dark easily, so here's a command to switch between them. @@ -215,27 +216,26 @@ dark easily, so here's a command to switch between them. :config (defun +oreo/switch-theme () (interactive) - (cond - ((eq +oreo/theme 'dark) - (mapc #'disable-theme custom-enabled-themes) - (load-theme 'personal-light t) - (setq +oreo/theme 'light)) - ((eq +oreo/theme 'light) - (mapc #'disable-theme custom-enabled-themes) - (load-theme 'personal-primary t) - (setq +oreo/theme 'dark)))) - ) + (cl-case +oreo/theme + (dark + (mapc #'disable-theme custom-enabled-themes) + (load-theme 'modus-operandi t) + (setq +oreo/theme 'light)) + (light + (mapc #'disable-theme custom-enabled-themes) + (load-theme 'personal-primary t) + (setq +oreo/theme 'dark))))) #+end_src ** Font size Set font size to 140 if on my desktop (oldboy) or 175 if on my laptop -(spiderboy). +(newboy). #+begin_src emacs-lisp (use-package faces :defer t :config (+oreo/sys-name-cond - ("spiderboy" (set-face-attribute 'default nil :height 145)) - ("oldboy" (set-face-attribute 'default nil :height 140)))) + ("newboy" (set-face-attribute 'default nil :height 145)) + ("oldboy" (set-face-attribute 'default nil :height 155)))) #+end_src ** Startup screen The default startup screen is quite bad in all honesty. While for a @@ -243,10 +243,14 @@ first time user it can be very helpful in running the tutorial and finding out more about Emacs, for someone who's already configured it there isn't much point. -The scratch buffer is an interaction buffer made when Emacs is first -started, as a way to quickly prototype Emacs Lisp code. When startup -screen is disabled, this buffer is the first thing presented on boot -for Emacs. So we can use it to store some useful information. +The scratch buffer is an interaction buffer, made when Emacs is first +started, to quickly prototype Emacs Lisp code. When startup screen is +disabled, this buffer is the first thing presented on boot for Emacs. +So we can use it to store some useful information. + +2024-06-04: I use to load [[*Org mode][org-mode]] here for the scratch +buffer and it literally added 2 seconds of load time, so let's just +use fundamental mode and call it a day. #+begin_src emacs-lisp (use-package emacs :defer t @@ -268,16 +272,18 @@ for Emacs. So we can use it to store some useful information. emacs-version (emacs-init-time))))))) #+end_src ** Blinking cursor -Turn on blinking cursor (helps with seeing if Emacs is hanging or not). +Turn on blinking cursor. 2021-03-15: Turn off blinking-cursor-mode as [[*Hl-line][hl-line]] is better. +2024-06-04: Actually a blinking cursor helps to see if Emacs is +hanging, which hl-line just can't do. #+begin_src emacs-lisp (use-package frame :defer t :init (setq blink-cursor-delay 0.2) :config - (blink-cursor-mode 0)) + (blink-cursor-mode)) #+end_src ** Fringes Turning off borders in my window manager was a good idea, so turn off @@ -1004,17 +1010,17 @@ effectively. (tab-bar-mode) :general (tab-leader - "t" #'tab-switch + "R" #'tab-rename + "c" #'tab-close + "d" #'tab-close + "f" #'tab-detach + "h" #'tab-move-to "j" #'tab-next "k" #'tab-previous - "h" #'tab-move-to "l" #'tab-move "n" #'tab-new - "c" #'tab-close - "d" #'tab-close - "f" #'tab-detach - "w" #'tab-window-detach - "r" #'tab-rename) + "r" #'tab-switch + "w" #'tab-window-detach) (mode-leader "t" #'toggle-tab-bar-mode-from-frame)) #+end_src @@ -1416,53 +1422,6 @@ focus on a buffer. (jump-to-register 1) (olivetti-mode 0)))) #+end_src -*** Presentation mode -A simple presentation system using org-mode and olivetti. -#+begin_src emacs-lisp -(use-package olivetti - :defer t - :config - (defun +presentation/prev-slide () - (interactive) - (when presentation-mode - (widen) - (outline-previous-visible-heading 1) - (end-of-line) - (if (org-fold-folded-p) - (org-cycle)) - (org-narrow-to-subtree))) - (defun +presentation/next-slide () - (interactive) - (when presentation-mode - (widen) - (outline-next-visible-heading 1) - (end-of-line) - (if (org-fold-folded-p) - (org-cycle)) - (org-narrow-to-subtree))) - (defvar presentation-mode-map (make-sparse-keymap)) - (define-minor-mode presentation-mode - "When in org-mode, use each heading like a slide!" - :lighter nil - :keymap presentation-mode-map - (cond - (presentation-mode - (olivetti-mode t) - (outline-show-heading) - (org-narrow-to-subtree)) - (t - (olivetti-mode -1) - (widen)))) - :general - (leader - :states 'normal - :keymaps 'presentation-mode-map - "j" #'+presentation/next-slide - "k" #'+presentation/prev-slide) - (local-leader - :keymaps 'org-mode-map - "P" #'presentation-mode)) -#+end_src ** All the Icons Nice set of icons with a great user interface to manage them. #+begin_src emacs-lisp @@ -1750,22 +1709,32 @@ integrate it into my workflow just a bit better. message-send-mail-function #'smtpmail-send-it)) #+end_src ** Dired -Setup for dired. Make dired-hide-details-mode the default mode when -using dired-mode, as it removes the clutter. Setup evil collection -for dired (even though dired doesn't really conflict with evil, there -are some corners I'd like to adjust). +Dired: Directory editor for Emacs. An incredibly nifty piece of +software which deeply integrates with Emacs as a whole. Probably the +best file manager overall and for large scale file system tasks I +can't think of a better tool than this. + +Here I setup dired with a few niceties ++ Hide details by default (no extra stuff from ~ls~) ++ Omit dot files by default (using ~dired-omit-mode~) ++ If I have two dired windows open, moving or copying files in one + dired instance will automatically target the other dired window + (~dired-dwim~) ++ If opening an application on a PDF file, suggest ~zathura~ ++ Examine all the subdirectories within the same buffer + (~+dired/insert-all-subdirectories~) #+begin_src emacs-lisp (use-package dired :demand t :commands (dired find-dired) :hook - (dired-mode-hook . auto-revert-mode) - (dired-mode-hook . dired-hide-details-mode) + (dired-mode-hook . auto-revert-mode) + (dired-mode-hook . dired-hide-details-mode) + (dired-mode-hook . dired-omit-mode) :init (setq-default dired-listing-switches "-AFBlu --group-directories-first" dired-omit-files "^\\." - dired-dwim-target t - image-dired-external-viewer "nsxiv") + dired-dwim-target t) (with-eval-after-load "evil-collection" (evil-collection-dired-setup)) :general @@ -1773,6 +1742,8 @@ are some corners I'd like to adjust). :keymaps 'dired-mode-map "SPC" nil "SPC ," nil + "(" #'dired-hide-details-mode + ")" #'dired-omit-mode "T" #'dired-create-empty-file "H" #'dired-up-directory "L" #'dired-find-file) @@ -1788,22 +1759,12 @@ are some corners I'd like to adjust). :keymaps 'dired-mode-map "i" #'dired-maybe-insert-subdir "I" #'+dired/insert-all-subdirectories + "o" #'dired-omit-mode "k" #'dired-prev-subdir "j" #'dired-next-subdir "K" #'dired-kill-subdir "m" #'dired-mark-files-regexp "u" #'dired-undo) - (nmmap - :keymaps 'image-dired-thumbnail-mode-map - "h" #'image-dired-backward-image - "l" #'image-dired-forward-image - "j" #'image-dired-next-line - "k" #'image-dired-previous-line - "H" #'image-dired-display-previous - "L" #'image-dired-display-next - "RET" #'image-dired-display-this - "m" #'image-dired-mark-thumb-original-file - "q" #'quit-window) :config (add-to-list 'dired-guess-shell-alist-user '("\\.pdf\\'" "zathura")) (defun +dired/insert-all-subdirectories () @@ -1813,6 +1774,28 @@ are some corners I'd like to adjust). (mapc #'dired-insert-subdir (dired-get-marked-files)) (dired-unmark-all-marks))) #+end_src +*** image-dired +Image dired is a little cherry on top for Dired: the ability to look +through swathes of images in a centralised fashion while still being +able to do all the usual dired stuff as well is really cool. +#+begin_src emacs-lisp +(use-package dired + :defer t + :init + (setq image-dired-external-viewer "nsxiv") + :general + (nmmap + :keymaps 'image-dired-thumbnail-mode-map + "h" #'image-dired-backward-image + "l" #'image-dired-forward-image + "j" #'image-dired-next-line + "k" #'image-dired-previous-line + "H" #'image-dired-display-previous + "L" #'image-dired-display-next + "RET" #'image-dired-display-this + "m" #'image-dired-mark-thumb-original-file + "q" #'quit-window)) +#+end_src *** fd-dired Uses fd for finding file results in a directory: ~find-dired~ -> ~fd-dired~. @@ -2527,7 +2510,7 @@ limit), so set it for specific modes need the help. (org-mode-hook . whitespace-mode) (text-mode-hook . whitespace-mode) :init - (setq whitespace-style '(face empty spaces tabs tab-mark newline) + (setq whitespace-style '(face empty spaces tabs tab-mark newline trailing missing-newline-at-eof) whitespace-line-column 80)) #+end_src ** Set auto-fill-mode for all text-modes @@ -3130,7 +3113,7 @@ them. This allows me to search my configuration pretty quickly. (defun +org/search-config-headings () "Searches config.org for org headings via +org/swiper-goto" (interactive) - (counsel-rg "^\\* " (file-name-directory user-emacs-directory)))) + (counsel-rg "^\\* " (file-name-directory user-emacs-directory) "--max-depth=1"))) #+end_src ** Org Agenda Org agenda provides a nice viewing for schedules. With org mode it's @@ -3369,52 +3352,58 @@ change it for C++. :auto-insert (("[mM]akefile\\'" . "Makefile skeleton") "" - "CC=gcc + "CC=gcc +OUT=main.out +LIBS= +ARGS= + GFLAGS=-Wall -Wextra -Werror -Wswitch-enum -std=c11 DFLAGS=-ggdb -fsanitize=address -fsanitize=undefined +DEPFLAGS=-MT $@ -MMD -MP -MF RFLAGS=-O3 ifdef RELEASE CFLAGS=$(GFLAGS) $(RFLAGS) else CFLAGS=$(GFLAGS) $(DFLAGS) endif -LIBS= - -ARGS= -OUT=main.out SRC=src DIST=build CODE=$(addprefix $(SRC)/, ) # add source files here OBJECTS=$(CODE:$(SRC)/%.c=$(DIST)/%.o) DEPDIR:=$(DIST)/dependencies -DEPFLAGS=-MT $@ -MMD -MP -MF DEPS:=$(CODE:$(SRC)/%.c=$(DEPDIR):%.d) $(DEPDIR)/main.d +TERM_YELLOW:=$(shell echo -e \"\\e[0;33m\") +TERM_GREEN:=$(shell echo -e \"\\e[0;32m\") +TERM_RESET:=$(shell echo -e \"\\e[0;0m\") + .PHONY: all all: $(OUT) $(OUT): $(DIST)/$(OUT) $(DIST)/$(OUT): $(OBJECTS) $(DIST)/main.o | $(DIST) - $(CC) $(CFLAGS) $^ -o $@ $(LIBS) + @$(CC) $(CFLAGS) $^ -o $@ $(LIBS) + @echo \"$(TERM_GREEN)$@$(TERM_RESET): $^\" $(DIST)/%.o: $(SRC)/%.c | $(DIST) $(DEPDIR) - $(CC) $(CFLAGS) $(DEPFLAGS) $(DEPDIR)/$*.d -c $< -o $@ $(LIBS) + @$(CC) $(CFLAGS) $(DEPFLAGS) $(DEPDIR)/$*.d -c $< -o $@ $(LIBS) + @echo \"$(TERM_YELLOW)$@$(TERM_RESET): $<\" .PHONY: run run: $(DIST)/$(OUT) - ./$^ $(ARGS) + ./$^ $(ARGS) .PHONY: clean: - rm -rfv $(DIST)/* + @rm -rfv $(DIST)/* $(DIST): - mkdir -p $(DIST) + @mkdir -p $(DIST) $(DEPDIR): - mkdir -p $(DEPDIR) + @mkdir -p $(DEPDIR) -include $(DEPS) " |